Preparing for the Procedure - Data Warehouse Appliances

2850 Platform Hardware Replacement Guide for Customers

Product
Data Warehouse Appliances
Published
February 2018
Language
English (United States)
Last Update
2018-04-17
dita:mapPath
cgi1471887107887.ditamap
dita:ditavalPath
2850.ditaval.ditaval
dita:id
drz1471648613954
Product Category
Hardware
Data loss and/or warranty violation may occur if this procedure is not strictly followed. Accessing or initiating other replacement procedures may cause data loss and loss of warranty coverage.
Wear an anti-static wrist strap attached to an unpainted metal surface on the rack or chassis when handling parts.
Only trained customer personnel should perform this procedure.
  1. If necessary, log on to https://access.teradata.com and initiate an incident.
  2. Obtain a replacement part as described in Obtaining a Replacement Part.
  3. Contact the system administrator if you do not know the host name or IP address of the designated host CMIC (SMWeb 12.06 and later) or SOV-enabled CMIC (SMWeb 12.05 and earlier).
    In SMWeb 12.05 and earlier, you must access the home page of a CMIC that is SOV-enabled. If the CMIC is not SOV-enabled, most web applications and pages are unavailable. If this occurs, you must navigate to the SMWeb home page of an SOV-enabled CMIC. For more information about the SMWeb home page, see SMWeb online help or the Teradata Server Management Web Services User Guide (B035-5350) available at http://www.info.teradata.com.
  4. Remove the new part from its packaging and place it on a static-free surface.
  5. Record the serial number and/or part number of the new part in the site equipment log.
  6. Using a browser, connect to the Server Management Web Services home page by typing the following in the Address field of the browser:
    CMIC Version Home Page Address
    SMWeb 12.06 and later: http://<hostname or IP address of CMIC or Teradata ServiceConnect connection>:9981/CWA/home.asp
    SMWeb 12.05 and earlier: http://<hostname or IP address of SOV-enabled CMIC>:9980/CWA/home.asp
  7. On the Server Management Web Services home page, click Server Management Client.
  8. If prompted, log on to Server Management Client as a Service User. The Server Management Client software opens.
  9. Identify the node containing the failed power supply:
    1. In the Server Management Client window, click the Summary Alerts tab.
    2. In the Summary Alerts tab, locate the relevant alert summary.
    3. In the alert summary, click Locate Components. The affected component is highlighted in the Tree View.
  10. Open a maintenance window. This prevents alerts from being forwarded to Teradata Customer Support at sites that are TVI-connected.
    1. In the Server Management Client window, ensure that the failed node is highlighted.
    2. In the Server Management Client window, select Functions > Maintenance Window. A Maintenance Window dialog box appears.


    3. Enter a name for the maintenance window.
    4. Set the Start Time and the End Time.
    5. Click Activate.
    6. In the Information dialog box that appears, click OK to acknowledge the maintenance window has been saved.
  11. In the Tree View, click the affected node to highlight it.
  12. Select Functions > Replace FRU.
  13. When the Replace FRU dialog box appears, select Chassis Component, then click OK. The Node window appears.
  14. If necessary, click the tab with a indicating the location of the failed node power supply.


  15. Select the numbered red icon identifying the failed power supply.
  16. Verify that the node power supply is ready for servicing.
  17. In the FRU Replace window, click OK. The software checks the power supply status and verifies that all conditions for replacing the power supply have been met.
    If any problems are encountered, notify Teradata Customer Support. Use a contact method that is in accordance with your service contract. If your system is not set up with Automatic Incident Creation (AIC), log on to https://access.teradata.com and initiate or update an incident. If your system is set up with AIC, close the maintenance window and add a comment.
  18. Click OK to enable the chassis locator LED.