Installing Side Panels - Data Mart Appliances

670 Platform Product and Site Preparation Guide

Product
Data Mart Appliances
Published
June 2015
Language
English (United States)
Last Update
2018-04-13
dita:mapPath
rac1471886432192.ditamap
dita:ditavalPath
670.ditaval.ditaval
dita:id
oiu1471648935842
Product Category
Hardware
The side panels hang on the side of the cabinet using two brackets, top and bottom, and three alignment pins at the top. The brackets have a tight slip fit to keep them in place. One metal clip at the bottom rear of the panel secures the rear of the panel to the cabinet. A handle in the center of the panel for lifting and carrying the panel.
The side panel is large and bulky and may require two people for installation.
There is a left side panel and a right side panel.
  1. Using the handle in the center of the panel, take either side panel and hold it against the side of the cabinet.
  2. Lift the side panel and hold it against the cabinet so the brackets will slip over the two cross members of the cabinet.
  3. Align the three pins at the top of the panel with the holes in the top of the cabinet.
  4. Ensure you push the rear of the panel in as you lower the panel into place to engage the clip at the bottom rear of the panel.
  5. Repeat all steps for the other panels.