AC Power Cord Egress from Top or Bottom of Cabinet - Aster Appliances

Aster Appliance 3H and 4 Platforms Product and Site Preparation Guide

Product
Aster Appliances
Published
February 2018
Language
English (United States)
Last Update
2018-04-16
dita:mapPath
vjp1471886019008.ditamap
dita:ditavalPath
aster3.ditaval.ditaval
dita:id
zua1471650759470
lifecycle
previous
Product Category
Hardware

The cabinet uses AC feeder boxes mounted to the sidewalls on the inside of the cabinet. The AC feeder boxes allow approximately 2.74 m (9 ft) of cable egress out of the top or bottom of the cabinet.

To ensure that the cabinet is configured according to the customer's power cord egress preference (top or bottom egress), the cabinet must be ordered with the power feature for top power cord egress or bottom power cord egress.

The InfiniBand switch cabinet uses AC boxes mounted in U spaces at the bottom of the cabinet. The AC boxes allow the power cord to egress approximately 4.27 m (14 ft) out of the bottom of the rack or approximately 2.44 (8 ft) out the top of the rack. The InfiniBand switch cabinet does not have a power feature that specifies top power cord egress or bottom power cord egress.