Configure BAR Portlets on a Viewpoint Instance | Teradata VantageCloud Enterprise on AWS (DIY) - Configuring BAR Portlets on a Viewpoint Instance - Teradata® VantageCloud Enterprise on AWS

VantageCloud Enterprise on AWS (DIY) Installation and Administration Guide - 2.4

Deployment
VantageCloud
Edition
Enterprise
Product
Teradata® VantageCloud Enterprise on AWS
Release Number
2.4
Published
June 2023
Language
English (United States)
Last Update
2023-06-30
dita:mapPath
kma1662437965174.ditamap
dita:ditavalPath
nat1649317391363.ditaval
dita:id
B035-2800
Product Category
Cloud
Although you can configure this software yourself, we recommend contacting Teradata Ecosystem Services. See https://www.teradata.com/About-Us/Contact.

Depending on how you deployed your instances, use the following table to determine whether you need to complete this procedure.

Ecosystem AWS CloudFormation Manual 1-Click
Yes Yes Yes Yes

You must configure the BAR portlets if you plan to use Teradata Viewpoint for data backup.

  1. From the AWS Management Console, note the Private IP of the DSC instance and either the Public IP or Public DNS of the Viewpoint instance.
  2. From your browser, go to the Viewpoint portal logon screen.

    http://public-DNS

    or

    http://public-IP

    where: public-DNS is the DNS host name or public-IP is the public IP address of the Viewpoint instance.

  3. Log on to the Teradata Viewpoint portal using administrator credentials.
  4. Enable or add an additional DSC server.
    1. Open the BAR Setup portlet.
    2. Next to DSC, select "".
    3. In General System Details, enter the Broker IP/Host.
      This is the host name or IP address of the machine running the ActiveMQ broker, usually the DSC server. Enter the private IP of the DSC server.
    4. Enter the Broker Port.
      This is the port number on the server where the ActiveMQ broker is listening (61616 for tcp, 61617 for ssl). Default: 61616
    5. Enter the Broker Connectivity Type of the ActiveMQ connection (tcp or ssl).
      The default is tcp.
  5. Select Enable DSC server.
  6. Under DSC Servers, select the server you enabled.
    1. Select Discover Servers, then select the DSC Server Name from the list.
  7. Select Apply.