Network Diagram | Teradata Data Mover - Data Mover Network Diagram - Teradata Data Mover

Teradata® Data Mover Installation, Configuration, and Upgrade Guide for Customers - 20.03
Deployment
VantageCloud
VantageCore
Edition
Enterprise
IntelliFlex
Lake
VMware
Product
Teradata Data Mover
Release Number
20.03
Published
July 2024
ft:locale
en-US
ft:lastEdition
2024-07-17
dita:mapPath
vuu1713418923137.ditamap
dita:ditavalPath
stp1591127384938.ditaval
dita:id
pqq1467243714524
Product Category
Analytical Ecosystem

Single Data Mover Host with Viewpoint Portlet

This scenario assumes the following setup:
  • Single Data Mover host with Data Mover daemon, single Data Mover agent
  • Viewpoint host with Data Mover portlet
  • Teradata Source/Teradata Target
  • Embedded DSC on Data Mover host and ClientHandler on source or target Teradata TPA nodes
Single Data Mover host with Viewpoint portlet
Host Port Connection Type Notes
Data Mover 61616 TCP If using embedded DSC on Data Mover host, the ClientHandler connects to Data Mover host using port 61616.
Viewpoint 443 HTTPS If security is enabled, Data Mover connects to Viewpoint host using port 443 (80 if using HTTP).
Teradata Source/Teradata Target 443/1025 HTTPS/TCP Data Mover connects to Teradata Source/Teradata Target using HTTPS over port 443 if TLS 1.2 encryption is enabled. Otherwise Data Mover uses TCP over port 1025.

Viewpoint Data Mover portlet connects to Teradata Source/Teradata Target using port 1025.
Data Mover 1443 HTTPS The Data Mover Viewpoint portlet connects to the Data Mover host using Data Mover REST API port 1443.
Server Management 443/9981 HTTPS Data Mover connects to Server Management using HTTPS using port 443 when using CMIC version 14.06.01 or later.

Earlier versions of CMIC use port 9981.
QueryGrid Manager 9443 HTTPS Data Mover connects to QueryGrid Manager for status on T2T jobs using HTTPS using port 9443.

HA Data Mover Cluster

This scenario assumes the following setup:
  • Active Data Mover host with Data Mover daemon, single Data Mover agent
  • Standby Data Mover host with offline Data Mover daemon, online single Data Mover agent
  • Viewpoint cluster with each host having Data Mover portlet and Data Mover failover monitor
  • Embedded DSC on both active and standby Data Mover host (only DSC on active Data Mover host online)
  • ClientHandler on Teradata Source/Teradata Target TPA nodes
  • Teradata Source/Teradata Target

HA_Data_Mover_cluster_diagram.PNG

If Data Mover failover occurs, the active and standby Data Mover host switches roles. Therefore, when setting up ports, configure both active and standby Data Mover host in the same manner so that either can function as the active Data Mover host.

Host Port Connection Type Notes
Active Data Mover Host 61616 TCP If using embedded DSC on Data Mover host, the ClientHandler connects to Data Mover host using port 61616.
Active Data Mover Host 22 SSH The Data Mover failover monitor running on Viewpoint hosts connects to Data Mover host using port 22.

The Data Mover cluster command running on standby Data Mover host connects to Data Mover host using port 22.
Active Data Mover Host 5432 TCP The standby postgres sync running on standby Data Mover host connects to postgres logical sync service using port 5432.

The Data Mover failover monitor runs JDBC query to verify repo status by connecting to port 5432.
Active Data Mover Host 443 HTTPS The Data Mover Viewpoint portlet connects to the Data Mover host using Data Mover REST API port 443.
Active Data Mover Host 9090 HTTPS Data Mover Agent on secondary Data Mover host connects to DSA REST running on primary Data Mover host using port 9090.
Standby Data Mover Host 61616 TCP If using embedded DSC on Data Mover host, the Clienthandler connects to Data Mover host using port 61616.
Standby Data Mover Host 22 SSH The Data Mover failover monitor running on Viewpoint hosts connects to Data Mover host using port 22.

The Data Mover cluster command running on standby Data Mover host connects to Data Mover host using port 22.

Standby Data Mover Host 443 HTTPS The Data Mover Viewpoint portlet connects to Data Mover host using DM REST API port 443.
Standby Data Mover Host 5432 TCP The Data Mover failover monitor runs JDBC query to verify repo status by connecting to port 5432.
Standby Data Mover Host 9090 HTTPS If failover occurs, external Data Mover Agent connects to DSA REST running on secondary Data Mover host using port 9090.
Primary Viewpoint Host 443 HTTPS If security is enabled, Data Mover connects to Viewpoint host using port 443 (80 if using HTTP).
Primary Viewpoint Host 22 SSH The Data Mover failover monitor running on secondary Viewpoint host connects to primary Viewpoint host using port 22.

The Data Mover cluster command running on either active or standby Data Mover host connects to Viewpoint host using port 22.
Primary Viewpoint Host 5432 TCP The Data Mover failover monitor connects to Active Data Mover host to check whether repository is running using JDBC connection.
Secondary Viewpoint Host 443 HTTPS If security is enabled, Data Mover connects to Viewpoint host using port 443 (80 if using HTTP).
Secondary Viewpoint Host 22 SSH The Data Mover failover monitor running on secondary Viewpoint host connects to primary Viewpoint host using port 22.

The Data Mover cluster command running on either active or standby Data Mover host connects to Viewpoint host using port 22.
Secondary Viewpoint Host 5432 TCP The Data Mover failover monitor connects to standby Data Mover host to check whether repository is running using JDBC connection.
Teradata Source/Teradata Target 443/1025 HTTPS/TCP Data Mover connects to Teradata Source/Teradata Target using HTTPS over port 443 if TLS 1.2 encryption is enabled. Otherwise TCP over port 1025 is used. Viewpoint Data Mover portlet connects to Teradata Source/Teradata Target using port 1025.
Server Management 443/9981 HTTPS Data Mover connects to Server Management using HTTPS using port 443/9981.
  • Port 443: used if CMIC is 14.06.01 or later.
  • Earlier versions of CMIC use port 9981.
QueryGrid Manager 9443 HTTPS Data Mover connects to QueryGrid Manager for status on T2T jobs using HTTPS using port 9443.

Additional Configurations

Data Mover Command Line Running on External Client Host

This scenario assumes the following setup:
  • Data Mover CommandLine is installed on external client host and configured to connect to Data Mover host
  • Host information is added to the accept.host.list property. For more information on the Accept Host List, refer to the RESTFul API section of the Teradata® Data Mover User Guide, B035-4101

Data Mover CommandLine running on external client host
Host Port Connection Type Notes
Data Mover 1443 HTTPS The Data Mover CommandLine connects to the Data Mover host (active or standby) using Data Mover REST API port 1443.
Data Mover 61616 TCP Data Mover REST and Data Mover daemon connects to tdactiveMQ using port 61616.

Client Calling Data Mover REST API from External Host

This scenario assumes the following setup:
  • The client is making REST calls to the Data Mover REST API from an external host
  • Host information is added to the accept.host.list property. For more information on the Accept Host List, refer to the RESTFul API section of the Teradata® Data Mover User Guide, B035-4101
Host Port Connection Type Notes
Data Mover 1443 HTTPS The client connects to the Data Mover host using port 1443.

Data Mover Using Embedded DSC

This scenario assumes the following setup:
  • Data Mover is configured to use embedded DSC running on Data Mover host

Data Mover using embedded DSC
Host Port Connection Type Notes
Data Mover 61616 TCP DSA NC (network client), DSMain connecting to tdactiveMQ to communicate with DSC.
Data Mover 9090 HTTPS Internal connection in this configuration. Data Mover connect to DSA REST on same server using port 9090.
Data Mover 1443 HTTPS Internal connection in this configuration. DSC connects to DM REST on same server using port 1443.
Teradata TPA Node 15401 TCP DSMain connecting to DSA NC (assuming NC is installed on TPA node).

DSA NC connecting to other DSA NC on other TPA nodes (assuming NC installed on TPA node).
Teradata TPA Node 443/1025 HTTPS/TCP Data Mover connects to Teradata Source/Teradata Target using HTTPS over port 443 if TLS 1.2 encryption is enabled. Otherwise TCP over port 1025 is used.

Data Mover Using External DSC

This scenario assumes the following setup:
  • Data Mover is configured to use external DSC running on an external host
Host Port Connection Type Notes
Data Mover 1443 HTTPS The external DSC connects to Data Mover host using port 1443.
DSC 9090 HTTPS Data Mover connects to the DSC host using port 9090.
DSC 61616 TCP DSA NC, DSMain connecting to tdactiveMQ to communicate with DSC.
Teradata TPA Node 15401 TCP DSMain connecting to DSA NC (assuming NC installed on TPA node).

DSA NC connecting to other DSA NC on other TPA nodes (assuming NC installed on TPA node).
Teradata TPA Node 443/1025 HTTPS/TCP Data Mover connects to Teradata Source/Teradata Target using HTTPS over port 443 if TLS 1.2 encryption is enabled. Otherwise TCP over port 1025 is used.

Data Mover Using QueryGrid 2.x+

This scenario assumes the following setup:
  • Data Mover is configured to use QueryGrid 2.x and therefore is configured to call QueryGrid Manager on an external host
Host Port Connection Type Notes
QueryGrid Manager 9443 HTTPS Data Mover connects to the QueryGrid Manager host using port 9443.

Data Mover Using Cloud Staging Copy Service (CS2) with Embedded DSC

This scenario assumes the following setup:
  • Data Mover is configured to use Cloud Staging Copy Service (CS2) with the embedded DSC running on Data Mover host.

Data Mover Using CS2 with Embeded DSC

Host Port Connection Type Notes
Data Mover 61616 TCP DSA NC (network client), DSMain connecting to tdactiveMQ to communicate with DSC.
Data Mover 9090 HTTPS Internal connection in this configuration. Data Mover and CS2 connect to DSA REST on same server using port 9090.
Data Mover 1443 HTTPS Internal connection in this configuration. DSC connects to DM REST on same server using port 1443.
Teradata TPA Node 15401 TCP DSMain connecting to DSA NC (assuming NC is installed on TPA node).

DSA NC connecting to other DSA NC on other TPA nodes (assuming NC installed on TPA node).
Teradata TPA Node 443/1025 HTTPS/TCP Data Mover connects to Teradata Source/Teradata Target using HTTPS over port 443 if TLS 1.2 encryption is enabled. Otherwise TCP over port 1025 is used.
Data Mover 3443 HTTPS Internal connection in this configuration. Data Mover communicate with CS2 REST.

Data Mover and Single Sign On

If an IdP is integrated with Viewpoint and Viewpoint sends a JWT to Data Mover, then Data Mover connects to the IdP REST API. The default https port of IdP is 443, but if that changes, then Data Mover must have access to the different port.

Internal Connections on Data Mover Host

This scenario assumes the following setup:
  • Data Mover host with Data Mover daemon, single Data Mover agent
  • Embedded DSC

Internal connections on a Data Mover host
Host Port Connection Type Notes
Data Mover 61616 TCP The Data Mover daemon, Data Mover agent, Data Mover TPT Executor, Data Mover REST, DSA REST, and DSC all connect to tdactiveMQ using port 61616.
Data Mover 5432 TCP The Data Mover daemon, CS2, and DSC connect to the local Teradata repository using port 5432.
Data Mover 1443 HTTPS The DSC and Data Mover CommandLine connects to Data Mover REST using port 1443.
Data Mover 9090 HTTPS The Data Mover daemon and Data Mover agent connect to DSA REST using port 9090.

Internal Connections on Data Mover with Cloud Staging Copy Service (CS2)

This scenario assumes the following setup:
  • Data Mover host with Data Mover daemon, single Data Mover agent
  • Embedded DSC
  • Cloud Staging Copy Service (CS2) with Data Mover

Internal connections on a Data Mover host with CS2

Host Port Connection Type Notes
Data Mover 61616 TCP The Data Mover daemon, Data Mover agent, Data Mover TPT Executor, Data Mover REST, DSA REST, and DSC all connect to tdactiveMQ using port 61616.
Data Mover 5432 TCP The Data Mover daemon, CS2, and DSC connect to the local Teradata repository using port 5432.
Data Mover 1443 HTTPS The DSC and Data Mover CommandLine connects to Data Mover REST using port 1443.
Data Mover 9090 HTTPS The Data Mover daemon, Data Mover agent, and CS2 connect to DSA REST using port 9090.
Data Mover 3443 HTTPS The Data Mover daemon and Data Mover agent connect to CS2 using port 9090.