These columns provide a generalized picture of the vprocs running on this node, shown as Type n virtual processors where n = 1 to 7. Under the current implementation, only Type 1 (AMP), Type 2 (PE), Type 3 (GTW), Type 4 (RSG), and Type 5 (TVS) vprocs exist; vproc types 6 through 7 are not currently used.
| Column Name | Mode | Description | Data Type |
|---|---|---|---|
| GmtTime | n/a | Greenwich Mean Time is not affected by the Daylight Savings Time adjustments that occur twice a year. | FLOAT |
| NodeType | n/a | Type of node, representing the per node system family type. | CHAR(8) |
| TheTimestamp | n/a | Number of seconds since midnight, January 1, 1970. This column is useful for aligning data with the DBQL log. |
BIGINT |
| CentiSecs | n/a | Actual number of centiseconds in the logging period. This column is useful when performing data calculations with small elapsed times where the difference between centisecond-based data and whole seconds results in a percentage error. |
INTEGER |
| Secs | n/a | Actual number of seconds in the log period represented by this row. Normally the same as NominalSecs, but can be different in three cases:
Useful for normalizing the count statistics contained in this row, for example, to a per-second measurement. |
SMALLINT |
| NominalSecs | n/a | Specified or nominal number of seconds in the logging period. | SMALLINT |
| PM_CPU_COD | n/a | Platform Metering CPU COD value in one tenths of percent. For example, a value of 500 represents a PM CPU COD value of 50%. The value is set to 1000 if the PM CPU COD is disabled. |
SMALLINT |
| WM_CPU_COD | n/a | Workload Management CPU COD value in one tenths of a percent. For example, a value of 500 represents a WM CPU COD value of 50.0%. The value is set to 1000 if the WM CPU COD is disabled. WM CPU COD is not supported on SLES 10. Its value is set to 1000 on SLES 10.
|
SMALLINT |
| PM_IO_COD | n/a | Platform Metering I/O COD value in whole percent values for the entire system. For example, a value of 50 represents a PM I/O COD value of 50%. The value is set to 100 if the PM I/O COD is disabled. |
SMALLINT |
| WM_IO_COD | n/a | Workload Management I/O COD value in whole percent. For example, a value of 50 represents a WM I/O COD value of 50.0%. The value is set to 100 if the WM I/O COD is disabled. WM I/O COD is not supported on SLES 10. Its value is set to 100 on SLES 10.
|
SMALLINT |
| NCPUs | n/a | Number of CPUs on this node. This column is useful for normalizing the CPU utilization column values for the number of CPUs on the node. This is especially important in coexistence systems where the number of CPUs can vary across system nodes. |
SMALLINT |
| Vproc1 | n/a | Current count of type 1 (AMP) virtual processors running on the node. | SMALLINT |
| Vproc2 | n/a | Current count of type 2 (PE) virtual processors running under the node. | SMALLINT |
| Vproc3 | n/a | Current count of type 3 (GTW) virtual processors running under the node. | SMALLINT |
| Vproc4 | n/a | Current count of type 4 (RSG) virtual processors running under the node. | SMALLINT |
| Vproc5 | n/a | Current count of type 5 (TVS) virtual processors running under the node. | SMALLINT |
| Vproc6 | n/a | Current count of type 6 virtual processors running under the node. This column reports zeros. |
SMALLINT |
| Vproc7 | n/a | Current count of type 7 virtual processors running under the node. This column reports zeros. |
SMALLINT |
| VprocType1 | n/a | Type of virtual processor for Vproc1. When the vproc is present on the node, the value is AMP. | CHAR(4) |
| VprocType2 | n/a | Type of virtual processor for Vproc2. When the vproc is present on the node, the value is PE. | CHAR(4) |
| VprocType3 | n/a | Type of virtual processor for Vproc3. When the vproc is present on the node, the value is GTW. | CHAR(4) |
| VprocType4 | n/a | Type of virtual processor for Vproc4. When the vproc is present on the node, the value is RSG. | CHAR(4) |
| VprocType5 | n/a | Type of virtual processor for Vproc5. When the vproc is present on the node, the value is TVS. | CHAR(4) |
| VprocType6 | n/a | Type of virtual processor for Vproc6. | CHAR(4) |
| VprocType7 | n/a | Type of virtual processor for Vproc7. | CHAR(4) |
| MemSize | n/a | Amount of memory on this node in mega bytes. Useful for performing memory usage calculations. | BIGINT |
| NodeNormFactor | n/a | A per CPU normalization factor that is used to normalize the reported CPU values of the ResUsageSpma table to a single 5100 CPU. This value is scaled by a factor of 100. For example, if the actual factor is 5.25, the value of the NodeNormFactor will be 525. |
INTEGER |
| Active | max | Gets set to a non-zero value whenever one of the other data columns in the row is set. | FLOAT |
| NetSamples | count | Sample count for sampled statistics for a Bynet. NetSamples is used to normalize all net time monitored statistics to a percent-of-time basis. For example, dividing (NetTxIdle/NetSamples) yields the transmitter-idle time ratio for the net statistics.
|
FLOAT |