Flashing VMSs - Server Management

1. Download the current version of the VMS image zip file from http://tssprod.teradata.com:8080/TSFS/.
2. From SMWeb, click Network, Devices, and CMICs to log on to the CMIC Monitor.
3. Select CMICs > Firmware Upload.
4. Browse to locate the zip file, and then click Upload.
5. Click Continue.
6. On the CMIC Selection page, select the CMICs that are getting the firmware bundle.
7. Continue to the next screen where the firmware bundle is distributed to the selected CMICs.
8. From the SMClient Tree View, select one or more VMS devices.
9. Do one of the following:
   • Select Functions > Flash Firmware.
   • From the toolbar, click Flash Firmware.
   A confirmation message appears.
10. Click Yes.
11. When the firmware flash completes, click Yes.
12. If the flash is successful, do the following to reset the VMS devices:
    1. Select the same VMS devices.
    2. Select Functions > Reset. A confirmation message appears.
    3. Click Yes.
    4. When the reset completes, click Yes.
13. In the command status window, verify that the flash completed successfully and that the VMS was reset.