This applies to flashing the firmware on a VMS 1.x or 2.x only.
- Download the current version of the VMS image zip file from http://tssprod.teradata.com:8080/TSFS/.
- From SMWeb, click Network, Devices, and CMICs to log on to the CMIC Monitor.
- Select .
- Browse to locate the zip file, and then click Upload.
- Click Continue.
- On the CMIC Selection page, select the CMICs that are getting the firmware bundle.
- Continue to the next screen where the firmware bundle is distributed to the selected CMICs.
- From the SMClient Tree View, select one or more VMS devices.
-
Do one of the following:
- Select .
- From the toolbar, click Flash Firmware.
- Click Yes.
- When the firmware flash completes, click Yes.
-
If the flash is successful, do the following to reset the VMS devices:
- Select the same VMS devices.
- Select A confirmation message appears. .
- Click Yes.
- When the reset completes, click Yes.
- In the command status window, verify that the flash completed successfully and that the VMS was reset.