16.10 - Parallel Database Extensions (PDE) Messages - Teradata Database

prodname: Teradata Database
vrm_release: 16.10
category: Programming Reference
featnum: B035-1096-161K

Parallel Database Extensions (PDE) Messages
10101 Argument 1 is Invalid.
10102 Argument 2 is Invalid.
10103 Argument 3 is Invalid.
10104 Argument 4 is Invalid.
10105 Argument 5 is Invalid.
10106 Argument 6 is Invalid.
10107 Argument 7 is Invalid.
10108 Argument 8 is Invalid.
10109 Invalid address for argument 9.
10111 Resource limit is exceeded.
10112 System is not ready to issue a PDE service call.
10113 A syszone resource could not be acquired.
10114 Could not start %s PDE system daemon.
10115 A call to a sysqevent function has passed in an illegal qevent token.
10116 A call to sleep has resulted in a TIMEOUT wakeup.
10117 PDE device driver call failed: %$OsError.
10118 Syszone RCB elements have exhausted.
10119 The Operating System I/O Request Packet elements have exhausted.
10120 Force an automatic TPA restart. Restart reason is: %s
10180 sysqevent Queue has no tasks to process .
10181 Desired Priority Scheduler configuration is invalid
10182 Teradata restart with dump forced due to a fault in the exception handler for program %s
10183 TPA restart force due to %s unexpectedly exiting
10184 Force a TPA shutdown. Shutdown reason is: %s
10185 Priority boosting error detected.
10186 Unable to obtain Statistics Priority Scheduler (SPS) information.
10187 Force a TPA shutdown by DApowerfail script. Restart reason is: %s
10188 Priority Scheduler was unable to allocate %u bytes for stats.
10189 %s
10190 A call to a sysukevent function has passed in an illegal token.
10191 A call to a SYSLOCK function has passed in an illegal token.
10192 ERRSYSRESET: Operation aborted because of reset.
10193 Premature return from system call.
10194 System name limit reached.
10195 Premature return from system call.
10196 Force a TPA restart with a dump. Restart reason is: %s
10197 Force a TPA dump followed by panic dump. Restart reason is: %s
10198 Force a TPA restart. Restart reason is: %s
10199 Assertion failed.
10200 Monitor ID is not assigned.
10201 Process is not in the monitor.
10202 Process is already in the monitor.
10204 Process is not in the yield state.
10205 Monitor is in use by another task
10300 Address is in use.
10301 Invalid segment identifier.
10302 Invalid pointer: No segment at this address.
10303 Invalid segment: Illegal address for a segment.
10304 Lock conflict: Deadlock with self.
10305 Access argument is incorrect.
10306 Length argument is incorrect.
10307 Lock argument is incorrect.
10308 Cannot discard an accessed segment.
10309 Segments exhausted or no virtual memory for segment.
10310 ERRSEGRELOCATED: Segment is relocated.
10311 No swap space for segment.
10312 Cannot allocate SDB structure for segment.
10313 RCB contains an invalid segment size.
10314 Unable to map seg into user space.
10315 Segment Daemon failure.
10316 Segment system initialization is not complete
10317 Segments can not be grown in place under the NT OS.
10318 Segments can not be relocated under the NT OS.
10320 The called function is not supported in this release of PDE.
10321 The called function is not supported in this release of PDE.
10322 Failed to lock the pages backed by the segment.
10325 The segfilesize tunable is presently set to a lower value(%d). Expected value is (%d)
10326 The persistent segment list has been truncated to fit the buffer.
10327 The segment cannot be discarded with the persistent flag set.
10328 Cannot allocate kernel memory for a buffer in SEG.
10329 A bad handle was used for a persistent segment.
10330 The segment is not persistent as expected.
10331 A duplicate persistent segment exists in the vproc.
10332 Cannot discard a segment that is being discarded by another task.
10333 The partition limit for SEG memory has been reached.
10399 Unrecoverable error in segment system.
10402 Process ID is not valid.
10404 Critical region nesting limit exceeded.
10405 Cannot continue a task that is not suspended.
10406 Cannot pause a task in a critical region.
10408 Buffer is too small.
10409 Cannot pass segment to new task.
10410 Buffer size is too large.
10411 Unable to start a new task.
10414 Priority is not valid.
10415 Segment creation in child task failed with event %d.
10416 Task aborted abnormally. %$registers
10417 Stack overflow exception detected. %$registers
10418 ERRTSKSTOP: This event should not be logged.
10419 ERRTSKDEBUGSTOP: This event should not be logged.
10420 Unable to start a new task due to OS error %$OsError.
10421 Tsk call not implemented.
10422 Timeout waiting for task %d to stop - attempting forced termination.
10501 Hashcode is invalid.
10502 Location argument is an invalid pointer.
10503 Mailbox is still linked to a channel.
10504 No mailboxes are available.
10505 Mailbox is not in use.
10506 Mailbox number is out of range.
10507 Mailbox number is already in use.
10508 Mailbox does not belong to the caller.
10509 Worktype in miscargs is out of range.
10510 Category in miscargs is out of range.
10511 Remote address in miscargs is MSGNOADDR.
10512 Vproc ID is incorrect.
10513 Message cannot be routed.
10514 Non-host message sent to external transient mailbox.
10515 Message is too long.
10516 Segment is sharable.
10517 Mailbox address is invalid.
10518 Channel is already linked to a mailbox.
10519 Maximum message wait time exceeded.
10520 Host message sent to non-external transient mailbox.
10521 Message received is too large.
10522 Cannot allocate an RCB for a message.
10523 ERRMSGHOSTFLOW: This event should not be logged.
10524 Message flow control limit exceeded.
10525 mailbox lock failure 1
10526 mailbox lock failure 2
10527 Message system initialization is not complete
10528 Invalid event handle passed to msgsigbx
10529 Could not locate a v2p table entry for a vproc
10530 The operating system returned an error.
10531 Invalid Session ID
10532 subopcode is in not the valid range.
Restart reason is: %s
10593 parameters to msgtxrecfsg were not multiples of four bytes
10596 System Reset Initiated by the MSGKMSG Daemon. Reason: %s %$OsError
10597 Invalid msgkmsg request type.
10599 Relative vproc ID is invalid or inactive.
10600 Target program for PrgInvoke does not exist.
10601 Partition in target is not valid.
10602 Vproc in target is not valid.
10603 Message class in target is not valid.
10604 Partition in target is in use.
10605 Cannot create new process for %s
10606 Cannot allocate partition context for a new process
10607 Cannot allocate memory
10608 Invalid administrative thread operation: %d
10609 Timeout from administrative thread operation: %d
10610 Cannot operate on the proc file of the partition
10611 New process from prginvoke failed to initialize: %s Wait failed with %d event code
10612 New process from prginvoke hung while initializing: %s Wait failed with %d event code
10613 TPA process is exiting unexpectedly
10614 Invalid user name %s
10615 Invalid group name %s
10616 prgstartas protocol error
10617 Legacy UDF user authorization is disabled.
10699 Internal error in PRG services.
10800 No more dynamic channels are available.
10801 Channel does not exist.
10802 Channel is not a dynamic channel.
10804 Channel local state is not valid for this operation.
10805 ERRCHNFIRSTVPROC: This event should not be logged.
10806 ERRCHNLASTVPROC: This event should not be logged.
10807 New channel state is incorrect.
10808 The channel count parameter or returning value exceeded the maximum value, or overflowed.
10810 chncount() or chndata() was invoked before lastdone coordination.
10811 The grpid mismatch condition occurred during chnsignal or chnsigcount lastdone coordination.
10812 The lastdone group count underflow condition occurred either by chnsignal or chnsigcount.
10813 Invalid channel data length.
10814 Invalid channel data operation.
10815 Coordination cycle identifier mismatch.
10854 Bad sub-op %d
10858 Subop %d TxError code %d
10859 Subop %d RxError code %d
10860 Subop %d Exceeded MaxRetry %d
10861 Subop %d channel = %d
10862 Subop %d channel = %d
10863 GetIndex Error MyPma.Num %d channel = %d
10864 ChnGet: Ran out of channel, exceeded MaxRetry %d
10865 channel %d exceeded CHNMAXID %d
10866 GetPmaId Error MyPma.Num %d channel = %d
10900 No more dynamic groups available.
10901 Group does not exist.
10902 Group is not valid.
10903 Virtual processor is already a member of the group.
10904 Virtual processor is not a member of the group.
10905 Group count is locked.
10906 Group is not local.
10907 Group is not empty.
10908 grpset() was called.
10957 Failed ImplicitGrpEnter - Destination group was put.
11000 Attributes do not match segment found in memory.
11001 Ident contains an inconsistent value.
11002 Length is different than segment found in memory.
11003 Address pointer does not locate a valid segment.
11004 Class of segment is not what was expected.
11005 FSG IO counter is not cleared during fsgreset.
11006 Lock request would block.
11007 Attempt to upgrade lock as a result of special action.
11008 Deadlock detected with some other process.
11009 Deadlock detected with self.
11010 Attempt to change ident of segment to one already found in memory.
11011 Access contains an invalid value.
11012 Action contains an invalid value.
11013 Age contains an invalid value.
11014 Attributes contain an invalid value.
11015 Class contains an invalid value.
11016 Illegal combination of valid flavors.
11017 Flavor contains an invalid value.
11018 Length contains an invalid value.
11019 Lock contains an illegal value.
11020 Name contains an invalid field.
11021 Resusage argument contains an invalid value.
11022 Attempt made at new access or both copies of a DUAL segment,
11023 FSG Cache flush is already in progress.
11024 Active required segment not found in memory.
11025 Not enough virtual space for segment.
11026 Read error detected during read of segment.
11028 Write error during synchronous write.
11029 Read error (invalid extent) detected during read of segment.
11030 Conditional write lock request did not result in a write lock.
11032 This is not an AMP type vproc or it is not in the proper state.
11035 Flavor FSGACQDUALBOTH and at least one copy in memory
11036 A requested I/O operation failed to complete successfully.
11037 Bad wlsn passed to fsg.
11038 I/O data corruption during asynchronous write.
11039 A task exited with a write access to a non-ageless segment
11041 Write error during synchronous write.
11042 FSG ContigWrite uniqueID not found.
11043 State of the requested segment is still modified.
11045 Depot initialization requires at least one small depot slot
11046 System is not ready to issue a FSG service call.
11071 Unable to allocate HUGEPAGES for FSG Cache. FSG initialization will continue using 4 KiB pages.
11072 FSG detects lost I/O's.
11073 BLKCODE mismatch detected between FSG and the file system.
11074 Exceeded the maximum number of attempts to return VH list.
11075 There are no VH cylinders in TBIMP cache.
11076 FSG detects a lost write I/O.
11077 FSG detects a lost read I/O.
11078 Received Teradata Virtual Storage error.
11079 Received Teradata Vitual Storage error.
11080 A read to disk was returned to Teradata with good status, but the read actually did not occur.
11081 No room for segment to grow inside the allocated space.
11082 Cannot clear IO errors for this vproc.
11084 Not enough physical memory for FSG subsystem.
11085 FSG physical memory calculations: AvailablePages(%lu) = ((TotalPages(%lu) - (PagesPerVproc(%lu) x NumberOfVprocs(%d)) x CachePercent(%d%)) - TvsPages(%lu))
MinSlotsPerAmp(%d) SlotsPerAmp(%lu) = AvailablePages(%lu) / NumberOfAmps(%d) / 256 4K Pages per 1 MiB Slot
11086 The FSG subsystem can not be initialized for the program. %s failed with OS error %d.
11091 Cannot open pdisk: %s
11093 The FSG system can not be initialized for the vproc. %s failed with OS error %d.
11094 Received OS I/O error.
11095 Unrecoverable error in DBS file segment management.
11096 Unrecoverable error with SEG structure.
11097 Unrecoverable error with SUB structure.
11098 Unrecoverable error with SDB structure.
11099 Unrecoverable error with SRB structure.
11100 Illegal flow control selector.
11101 Illegal flow control index.
11102 Invalid flow control ID values.
11104 Illegal virtual processor number.
11105 No such processor.
11107 Invalid network subop code.
11108 Illegal relative virtual processor.
11109 Unable to flow control due to STREAMS thread.
11110 Configuration requested is unavailable.
11121 Flow control count beyond limit.
11122 Invalid Global Sequence Number.
11207 Teradata I/O Scheduler (tdsched) is not installed or the correct version is not running.
11208 WD id is not valid.
11209 Session info is not valid.
11210 Request already in WD move operation.
11211 Submit event failed.
11212 Request for move order not found.
11213 Unique session for move order not found.
11301 Invalid address or value for argument %d.
11310 VP id %d is invalid.
11311 VP %d's name is of invalid length.
11312 VP %d's name contains an invalid character.
11313 VP %d's share is invalid.
11314 VP %d's type is invalid.
11315 VP %d is not defined.
11316 WD id %d is invalid.
11317 WD %d's name is of invalid length.
11318 WD %d's name contains an invalid character.
11319 WD %d's VP is invalid.
11320 WD %d's VP is undefined.
11321 WD %d is not defined.
11323 WD %d's AL is invalid.
11324 WD %d's share is invalid.
11325 WD %d's SLG Tier is invalid.
11326 WD %d's cap is invalid.
11327 WD %d attribute does not belong to this WD type.
11328 WD %d is not tactical.
11329 WD %d's exception WD is not valid.
11330 WD %d's exception WD is not defined.
11331 There is a circular reference amongst the Exception WDs.
11332 WD %d's exception CPU is invalid.
11333 WD %d's exception I/O is invalid.
11334 WD %d's exception I/O units value is invalid.
11335 WD %d's type is invalid.
11336 AL id %d is invalid.
11337 AL %d access rate is invalid.
11338 Diagnostic id %d is invalid.
11339 Diagnostic %d's value is invalid.
11340 Active time value is invalid.
11341 Attribute flag 0x%x is invalid.
11342 CPU starvation threshold is invalid.
11343 I/O starvation threshold is invalid.
11344 Decay type is invalid.
11345 Decay CPU value argument %d is invalid.
11346 Decay CPU values are not increasing.
11347 Decay I/O value argument %d is invalid.
11348 Decay I/O values are not increasing.
11349 Decay I/O units value is invalid.
11350 WM COD CPU value is invalid.
11352 WM COD I/O value is invalid.
11354 AWT reservation value is invalid.
11355 AWT maximum value is invalid.
11356 The sum of all VP shares exceeds 100.
11357 VP %d's name is in use by another VP.
11358 WD %d's name is in use by another WD.
11359 AL rates are not increasing.
11360 Unable to delete in-use WD %d.
11361 The Default WD id, %d, is invalid.
11362 The Default WD %d is undefined.
11363 WM COD rate for %s changed from %u% to %u%.
11364 Expedited setting for WD %d is invalid.
11365 %s
11401 Cannot allocate a buffer in user virtual memory.
11403 Cannot start the host interface controller.
11404 Virtual processor ID is incorrect.
11405 New vproc state is incorrect.
11413 System state type is undefined.
11414 System state value is undefined.
11415 The counter number is out of range.
11416 Counter value is too large.
11418 New TPA state is undefined.
11419 New TPA substate is undefined.
11420 The PDE is not ready for tosgetcrashcount call.
11421 The PE vproc for the channel with CUA 0x%x is on a different node than the channel.
11430 Host group ID %d is not a lan or channel.
11431 No PE for CUA 0x%x in HGID %d
11432 TCI open/close error: %s: %s
11440 Alert for VPROC %d, state is being set to %s.
11441 Vproc storage is offline.
11449 Internal error in TOS services.
11450 Create/Open of GDO mapfile failed: %$OsError.
11451 Invalid GDO initialization arguments.
11452 Mapping resident Gdo failed: %$OsError
11453 Cannot load a GDO.
11454 Cannot synchronize GDOs.
11455 Cannot read a GDO.
11456 Cannot write a GDO.
11457 Cannot open a GDO.
11458 GDO file %s is corrupted.
11460 GDO name is undefined.
11461 The GDO is already locked.
11462 The GDO is not locked.
11463 The size of the GDO is greater than the given record size.
11464 The size exceeds the maximum for the GDO.
11465 The GDO is not a resident GDO.
11466 Unable to lock resident Gdo pages.
11467 Cannot Delete a GDO.
11468 Permanent Gdo greater than maximum size allowed.
11469 %s error: %d on %s
11470 Using tosgdo services before gdo initialization is complete
11471 Unable to map the system resident GDO in the kernel.
11472 Unable to read the resident GDO into the user buffer.
11473 Unable to write the resident GDO into the user buffer.
11500 The Merge-request has been aborted.
11501 Invalid Merge application block.
11502 Invalid Merge destination mailbox.
11503 Invalid Merge-file identifier.
11504 Invalid Merge-group identifier.
11505 Invalid merge pass-done mailbox.
11506 Invalid merge source mailbox.
11507 Merge has successfully been restarted.
11508 Merge processing cannot continue.
11509 Invalid merge row.
11510 Can't change keepresponse flag.
11511 Can't reposition.
11512 Continue expected.
11513 BYNET merge has no rows.
11514 Invalid skip count.
11515 BYNET merge skip count overflow.
11516 Merge response buffer size is too small.
11517 mrginix() was called while a previous rowpack was still pending.
11550 Merge request with unknown subop.
11551 Merge coordinator heap overflow.
11552 Merge reposition found null coordinator heap.
11553 Merge virtual processor heap overflow.
11554 Merge data block has inconsistent vproc id.
11555 Merge row location index buffer failure.
11557 Merge virtual processor heap sift-up failure.
11559 Merge coordinator heap sift-up failure.
11560 Merge encountered corrupted context chain.
11561 :Merge encountered corrupt application block.
11562 Merge data block has inconsistent relvp id.
11563 Merge encountered null RLOC buffer.
11564 Merge found unexpected SendReq service.
11565 Merge encountered unaligned row location.
11569 %$EventInfo: Sort key length mismatch detected (lens %d %d, mrgid 0x%04x 0x%04x 0x%04x, ses# 0x%04x 0x%04x, txn# 0x%04x 0x%04x 0x%04x).
11570 Merge row length exceeds internal limit.
11571 Merge page allocator exhausted.
11574 Merge user buffer too small: less than %d bytes.
11575 Merge detected illegal row count.
11576 Merge encountered invalid data block.
11579 Merge thread encountered null RCB.
11581 Merge could not allocate resources.
11582 Merge encountered a null virtual processor heap node.
11583 Merge found no participants within merge group.
11584 Merge received unexpected channel program reply: %x
11585 Merge channel program transmitter failure.
11586 Merge expected an allocated virtual processor heap.
11587 Merge unexpected virtual processor heap.
11589 Merge unexpected RCB allocated.
11590 GDO File name not specified or exceed 64 characters
11591 Merge expected service not available.
11593 Merge sorted row buffer has overflowed.
11594 Merge encountered row fragment with illegal length.
11598 Merge initiation encountered bad state: %x
11599 Merge expected non-zero virtual processor nodes.
11600 Destination address is incorrect.
11800 No more global semaphores are available.
11801 Semaphore does not exist.
11802 Cannot decrement a semaphore below zero.
11803 Semaphore value is too large.
11804 Semaphore id or idnex is not valid.
11805 PMA down.
11806 Bad gsmatomic() opcode.
11807 Mismatched gsmatomic() gsmid.
11853 Subop %d: RCB state Error:state:%d
11855 Subop %d reply = %d
11859 Invalid gsmid Subop %d gsmid %x
11901 Buffer ID is not valid.
11902 Buffer type is not valid.
11903 Buffer Id is not valid.
11904 Too many NULL return parameters.
11905 Rate class is not valid.
11906 The RSS rate %d is invalid.
11910 Resource monitoring is unavailable.
11911 RSS was unable to access or update the Control GDO.
11913 Resusage discarded some monitoring information because of insufficient resources; %s.
11914 RSS ecountered an anomaly in counting %s; expected %d but found %d.
11916 No data available for %s.
11918 Failure in acquisition or manipulation of a needed resource: %s.
11919 The RSS subsystem has encountered a system call error. %s.
11920 Attempt to open, or assertain SCSI address of, a physical disk resulted in the following error: %s.
11921 Rssd exited due to an exception. Exception Code = 0x%08X Flags = 0x%08X Address = 0x%08X 64 bit addrs ext = 0x%08X
11923 RSS: Expected and Actual wakeup time exceeded expected margin limits. Previous Time: %d Sleep Start Time: %d Current Time: %d Delta: %d Expected Delta: %d LOG rate: %d COLLECT rate: %d TDWM rate: %d GCD rate: %d DYNAMIC rate: %d Expired Period: %s
11927 Rss was unable to open a global mapping file. return value = 0x%08x. RSS data logging is not collected for this process.
11928 Rss was unable to memory map a shared file. file size = %d file name = %s
11929 Rss was unable to access windows performance information. return value = 0x%08x.
11930 Rss was unable to create a windows performance counter. return value = 0x%08x counter = %s
11932 Rss was unable to clean-up a performance data object.
11934 Rss was unable to complete a system call.
11935 Rss was unable to complete a system call. file size = %d file name = %s
11937 Rss was unable to complete a system call. return value = 0x%08x.
11940 Rss was unable to complete a system call.
11942 Rss timer event 0x%08x returned an unexpected error code: %d
11943 Rss was unable to create its timer event. Return code: %d
11944 Rss event %d is being throttled. %d events have been logged
11945 RssMalloc was unable to allocate %d bytes of memory.
11947 Rss was unable to access pdh information. return value = 0x%08x.
11948 Invalid ldv id 0x%08x passed to rssgethdr().
11949 Invalid host id %d passed to rssgethdr().
11950 Invalid table id %d passed to rssgethdr().
11951 Invalid number of CPUs %d indicated in toshardwarep.
11960 RSS performance counter data collection failure. function return status = 0x%08x counter return status = 0x%08x counter = %s
11968 Invalid pdisk index 0x%08x passed to rssgethdr().
11969 Invalid vdisk index 0x%08x
11970 rssd thread did not exit. WaitForSingleObject() returned 0x%08x, WAIT_TIMEOUT == 0x00000102L. RSS may not log some or all data. On Windows please verify the contents of the PDH registry entries "Counters" and "Help" under: HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindows NTCurrentVersionPerflib009
11971 Unable to open Extent Driver Device. return value = 0x%08x.
11972 Pdisk count from device map is zero. return status = 0x%08x.
11973 Device Map call returns an error status. return status = 0x%08x.
11974 Pdisk count from device map is incorrect. count from device map = %d count from vconfig gdo = %d
11976 rssd thread exit wait failed. WaitForSingleObject() returned 0x%08x, error code %d RSS may not log some or all data.
11977 Data overflow or negative in a resusage counter. Counter = 0x%08x index = %d value = %d interval = %d ticks Pdh data = %.2f elapse time = %d new data = %08x %08x old data = %08x %08x
11978 Two disk devices have the same device ID. Device ID = 0x%08x Device index %d: Major=%d, Minor=%d Device index %d: Major=%d, Minor=%d
11979 error encountered in deleting a file status = %d errcode = %d file = %s
11980 CPU statistics error cpu number = %d cpu time = %d, expected time = %d, gather interval = %d percent err = %.2f%
11981 Bad TOD value Current TOD sec = %d Current TOD usec = %d Previous TOD sec = %d Previous TOD usec = %d Elapse time = %d
11982 Cliend ID not available
Process id = %d Task id = %d
11983 Bad RSS handle
11984 Bad cliend ID Clientid = %d
11985 Buffer not available
11986 Bad mode parameter
11987 RSS was unable to unmap a memory mapped file. return status = %d file size = %d file name = %s
11988 Buffer creation fail
11989 Bad buffer size parameter
11990 RSS deamon is not ready
11991 Bad process for RSS environment
11992 A client slot is vacated slot = %d old process id = %d old task id = %d new process id = %d new task id = %d
11993 RSS Client Service is disabled
11994 No vdisk found for VprocId %d
11995 Two devices have the same device information.
11998 %$HeaderRSS debug event; %s.
11999 %$HeaderAn RSS internal software error occurred; %s.
12000 %s
12001 %s
12010 The system debugger is not active.
12100 There is no current logmark.
12101 Log message category is undefined.
12102 One or more CPU hardware category events have been discarded.
12103 One or more memory hardware category events have been discarded.
12104 One or more Bynet hardware category events have been discarded.
12105 One or more disk hardware category events have been discarded.
12106 One or more channel hardware category events have been discarded.
12107 One or more host category events have been discarded.
12108 One or more driver category events have been discarded.
12109 One or more resource category events have been discarded.
12110 One or more system category events have been discarded.
12111 One or more user category events have been discarded.
12112 One or more occurrence category events have been discarded.
12113 One or more abnormality category events have been discarded.
12114 User event number %d is invalid.
12115 A kernel panic occurred: %s
12116 %s
12122 %s
12123 A task snapshot dump has been taken for event number %d.
12124 A vproc snapshot dump has been taken for event number %d.
12126 The system is stopped for event number %d because the BreakStop flag is set in the Control GDO.
Attach the system debugger to continue.
12127 This Node is about to panic.
12128 The DBS is not responding.
12130 Panic data bundle ready event.
12131 Panic dumplook data bundle ready event.
12132 Panic alert event.
12160 The pending messages on DBS well-known mailboxes are not progressing.
12192 ERRLOGTESTFSYS logged
12193 ERRLOGTEST1: Logevent occurred in %s, line %d.
12194 ERRLOGTEST2: Logevent occurred in %s, line %d.
12195 ERRLOGTEST3: Logevent occurred in %s, line %d.
12196 ERRLOGTEST4: Logevent occurred in %s, line %d.
12198 A test event was signaled.
12199 Kernel event number %d is invalid.
12300 Unable to collect trace due to lack of memory %s
12301 Trace collection prematurely terminated due to %s PDE error event code: %d OS event code: %d
12302 Trace collection disabled due to %s PDE error event code: %d OS event code: %d
12303 Trace subsystem internal error.
12911 Devi detected RCB Bad Op.
12914 Devi detected MakeService Error.
13003 this is a non-TPA node.
13004 invalid Node ID.
13005 this node is a late joiner.
13006 split net detected.
13007 unable to transmit.
13008 coordinator has a bad TPA node list.
13009 Config service is busy.
13010 this node has been dropped from the TPA.
13011 cannot get an RCB.
13012 BLLI version mismatch.
13013 Config initialization did not complete.
13014 TPA reset generated by Bynet driver.
13015 System Reset Initiated by the Block queue Daemon.
13016 this node is a standby and has been dropped from the TPA.
13017 node %s is out of the configuration.
13018 %s.
13020 Standby node %s local standby flag not set.
13021 this node has been dropped from the TPA because it is illegal.
13022 Node count is bad.
13023 GDO node count is bad.
13003 this is a non-TPA node.
13004 invalid Node ID.
13005 this node is a late joiner.
13006 split net detected.
13007 unable to transmit.
13008 coordinator has a bad TPA node list.
13009 Config service is busy.
13010 this node has been dropped from the TPA.
13011 cannot get an RCB.
13012 BLLI version mismatch.
13013 Config initialization did not complete.
13014 TPA reset generated by Bynet driver.
13015 System Reset Initiated by the Block queue Daemon.
13016 this node is a standby and has been dropped from the TPA.
13017 node %s is out of the configuration.
13018 %s.
13020 Standby node %s local standby flag not set.
13021 this node has been dropped from the TPA because it is illegal.
13022 Node count is bad.
13023 GDO node count is bad.
13100 LZS not installed
13101 LZS cannot allocate memory
13102 LZS operation failed
13103 Invalid LZS flags
13104 Invalid LZS address
13105 Invalid LZS length
13106 LZS cannot hash
13107 Invalid LZS data
13108 LZS not configured correctly
13109 LZS busy
13407 Channel system reset from CUA = %X in slot %d
13414 Slot = %d Undefined event %X from Channel Adapter
13418 TCHN: Write aborted by the Channel: CUA=%X SLOT=%d Reason: %s
13419 TCHN:Read aborted by the Channel: CUA=%X SLOT=%d Reason: %s
13420 SetWaitableTimer() failed to schedule function:%X function arg=%X time_delay=%d
13426 Protocol error:%X between msg subsystem and channel driver. mtype:%d &nsmiscargs=%X mp=%X
13429 Host Channel Driver: line[%d] of %s Could not obtain %d bytes of user space memory.
13430 Host Channel Driver: line[%d] of %s CreateEvent() returned error: %d.
13431 Teradata Channel Driver: fault %d, subtype %d on %s
13434 Teradata Channel Driver: No response from adapter in slot = %d bus = %X. Channel interface traces have been captured automatically.
13451 Invalid checksum, calculated %X, received in message %X
13452 Invalid message type %X received from the adapter.
13460 CreateMutex() lock allocation failed for %s
13464 IOreq: unknown type:%d cua=%d iorp=%X ctxp=%X
13468 Message Subsystem failed to translate the message between the New format and the Old format. newaddrp=%X oldaddrp=%X addressclass=%X
13477 Message Subsystem sent a message larger than supported by TCI size:%d maximum size=%d mp:%X
13480 Uncorrectable channel CRC error Slot = %d Port = %X
13482 Slot = %d Channel Adapter taken out of service
13484 Teradata Channel Driver: fault %d, subtype %d on %s
13485 Teradata Channel Driver: error accessing TdTempDir %d, line %d path %s
13486 Channel device went ONLINE to OFFLINE CUA = %X in slot %d
13487 Host Channel Driver: line[%d] of %s Could not obtain %d byte free list element.
13488 Host Channel Driver: line[%d] of %s Could not allocate %d count NP context blocks.
13489 Host Channel Driver: line[%d] of %s EnableMasterNP() returned error: %d.
13490 Host Channel Driver: NP migrated from node [%d] to node %d.
13491 Host Channel Driver: line[%d] of %s PDE service call returned %d error.
13600 ERRDMPNOSPACE: This event should not be logged.
13602 %s
13604 Shortage of TD Dump Slots has been detected.
13605 Current ctl setting allow only 1 more dump to be captured. Clear/Save the dumps in dump directory or increase the limit in control gdo
13606 Clear/Save the dumps in the dump directory or increase the limit in control gdo. Otherwise the next dump creation would fail
13699 DMP internal error
13700 Cannot allocate memory for PDE initialization.
13701 Invalid relative vproc number.
13707 PDE startup synchronization point timed out on this node.
13709 User not authorized for PDE control service.
13711 Cannot enter a group.
13713 Cannot get number of members in a group.
13715 NTP status polling thread failed to start.
13716 The TPA node list file could not be written.
13717 Cannot set a channel.
13718 Cannot initialize the getpma structure area.
13720 Cannot read the VConfig GDO.
13721 Cannot write the VConfig GDO.
13724 Cannot initialize the VprocConfig GDO.
13725 Cannot read the VprocConfig GDO.
13726 Cannot write the VprocConfig GDO.
13727 Cannot initialize the Kernel GDO.
13728 Cannot initialize the Control GDO.
13729 Cannot read the Control GDO.
13730 Cannot write the Control GDO.
13731 Cannot initialize the V2P GDO.
13732 Cannot read the V2P GDO.
13733 Cannot write the V2P GDO.
13736 Cannot initialize the Hashmap GDO.
13742 Cannot write the getpma structure area.
13743 VConfig GDO does not match actual hardware.
13744 Cannot initialize the System GDO.
13745 Cannot read the System GDO.
13746 Cannot write the System GDO.
13748 Cannot write the Kernel GDO.
13749 NTP failed on this node.
13755 Cannot lock the VprocConfig GDO.
13759 Excess tasks started by PDE
13760 Insufficient swap space to start all vprocs assigned to this node.
13761 Excess nodes found in clique.
13763 Unable to create vproc %d global file: %$OsError
13764 Excess vprocs found in V2P GDO.
13765 PDE device driver global data not present.
13766 Cannot allocate space in the node global file.
13767 A msgkmsg request issued during TPA startup failed.
13768 TPA startup aborted due to startup.txt file errors
13770 Unable to start Teradata Virtual Storage vproc(s).
13771 Automatically restarting TPA to join newly started replacement nodes
13800 Too many memory allocations during TPA initialization.
13802 Attempt to start %s in vproc %d failed with error code %d.
13804 Unknown OneNodeAction in Control GDO. Defaulting to commit immediately to disk.
13805 Required node not available for vproc %d.
13806 No more nodes are available for vproc %d assignment.
13807 The operating system error %d returned attempting to locate /dev/cid. PDE will run with no console.
13809 Console timeout.
13810 Vconfig GDO is missing or corrupt.
13811 Vproc %d cannot be removed.
13815 Application not started because all AMPs are in NewProc or Fatal state.
13816 Application not started because the Start DBS flag is off in the Control GDO.
13821 Crash loop detected during TPA initialization.
13823 Cannot access node list from reconcile: %$OsError
13824 TPA reset occurred during PDE initialization (PDE event code 033-%d-00).
13825 The VConfig GDO is obsolete.
13826 StartDebug flag set in Control GDO. Application will not run until the system debugger is attached.
13827 %s not started: No Control vproc defined for %s (type %d) vprocs.
13828 Reconcile failed: Cannot open output file: %$OsError
13829 Reconcile failed: Cannot read output file: %$OsError
13830 Reconcile failed: Timeout waiting for reconcile to complete.
13831 Too many vprocs assigned to node to start vproc %d.
13833 PDE has been shut down on this node.
13837 Error in startup file: Too many TPA states defined. File: %s line %d Line: %s
13838 Error in startup file: %s File: %s line %d Line: %s
13839 Error in startup file: Identifier already defined File: %s line %d Line: %s
13840 Error in startup file: Invalid identifier File: %s line %d Line: %s
13841 Error in startup file: Invalid GDO size File: %s line %d Line: %s
13842 Error in startup file: Missing or invalid GDO name File: %s line %d Line: %s
13843 Error in startup file: Unknown variable name File: %s line %d Line: %s
13844 Error in startup file: State or substate already defined. File: %s line %d Line: %s
13847 Error in startup file: Unknown system family name File: %s line %d Line: %s
13848 Error in startup file: Cannot set ENV variable: %$OsError File: %s line %d Line: %s
13849 Unable to write clean shutdown status into Teradata Virtual Storage map file %s for vproc %d due to a file %s error (errno %d).
13853 Removing existing vproc %d.
13857 Application not started because the system-wide crash count has reached its limit.
13858 Application not started because the Minimum Node Action or the Clique Failure option in the Control GDO is set to DBS Shutdown.
13859 Application not started because the Minimum Node Action in the Control GDO is set to Clique-Down or DBS-Down.
13860 Default %s GDO created.
13862 Vproc type %d definition is changed.
13863 PDE stopped by reconcile.
13864 Minimum clique size set to %d nodes in the Control GDO.
13865 The system configuration requires all nodes in the clique to be up.
13866 Teradata was last up at %s, and cannot restart for %d seconds.
13867 NTP is not running on this node (ntp_status = %d, errno = %$OsError)
13868 Teradata stopped on this node due to temporal support restrictions.
13869 Invalid startup kmsg request type: %d
13870 Vdisk %d not changed to %d because vproc %d state is not NEWPROC
13871 HwPerfInfo.txt error: %s
13872 Vconfig GDO uses undefined %s type %d
13873 TPA startup aborted due to HwPerfInfo.txt file errors
13874 Node heartbeat polling thread failed to start.
13875 Node %s is missing from the bynet network.
13876 TPA startup is under strength for clique: %d
13877 I/O Capacity on Demand and Hard Limits are disabled on one or more invalid storage device(s) according to the Teradata I/O Scheduler (tdsched).
13880 Vproc %d is not grouped with others of vproc type %d.
13881 Vproc ID %d is not allowed.
13883 Teradata stopped on this node due to insufficient disk space.
13884 Teradata stopping on this node due to insufficient disk space.
13888 Pdisk type codes in the Vconfig GDO have not been updated by the V2R5 version of PUT.
13889 COD: %s
13890 Vproc %d not added to VprocConfig GDO because its vproc type is invalid.
13891 Global crashloop count will not be cleared; %$OsError.
13895 %s
13896 COD: %s
13897 Unable to open %16s file errno = %$OsError.
13898 Application not started because fatal AMPs count has reached the limit specified in the control gdo.
13899 Warning NTP failed on this node.
13900 Cannot open PDE device driver: %$OsError
13901 Invalid KTCB pointer.
13902 PdeVproc failed to enable PDE: %s
13903 PDE stopped due to OS request: %s
13904 Task aborted abnormally. %$registers
13905 %s
13906 %s
13907 PDE Debug Information: %s
13908 Spurious signal: %s
13909 Process terminated: %s
13910 %s
14000 Memory allocation failed:%s
14001 System id on device does not match current system:%s
14002 Cookie on device does not match TVS cookie:%s
14003 Could not obtain the global device list:%s
14004 Could not get device info:%s
14005 Bad size for MapBlockDisk:%s
14006 Error during start-up:%s
14007 Function not implemented yet:%s
14008 Bad startup sequence:%s
14009 Agent would not start:%s
14010 Bad vproc id passed as parameter:%s
14011 Can't find TVS vprocs in clique:%s
14012 Can't find low TVS vproc on node:%s
14013 Bad subpool list size:%s
14014 Can't find clique in vconfig:%s
14015 Bad index for allocator:%s
14016 Could not open the device or file:%s
14017 Invalid global device number:%s
14018 Could not read device tag:%s
14019 Bad subpool AMP list size:%s
14020 Could not delete file:%s
14021 Could not write to file/device:%s
14022 Could not seek to offset:%s
14023 Could not write device tag:%s
14024 Could not initialize file memory map:%s
14025 Calculation error in gerrymander map size:%s
14026 Could not read from file/device:%s
14027 Could not obtain allocator list:%s
14028 Entry for physical extent missing from map:%s
14029 Could not recover extent info from CIs:%s
14030 Could not synch file to disk:%s
14031 Map space on disk needs to be increased:%s
14032 Could not expand map:%s
14033 Miscalculation during gerrymandering:%s
14034 Could not find shuffle obsolete entry for extent map recovery:%s
14035 Filinspectcis() failed:%s
14036 Large extent crosses chunk boundaries:%s
14037 Got invalid extent size from filinspectcis:%s
14038 Could not find map entry during expansion:%s
14039 Invalid map blocks found:%s
14040 Could not find free extents when expanding map or fixing boundary crosser:%s
14041 Could not copy data when expanding map:%s
14042 Bad absolute or relative extent number:%s
14043 Bad calculation during device map layout:%s
14044 Bad calculation during stats layout:%s
14045 Unexpected result:%s
14046 Couldn't find extent entry:%s
14047 Too many entries allocated:%s
14048 Function table not loaded:%s
14049 Device is uninitialized or corrupt:%s
14050 Caught unexpected OS exception:%s
14051 Allocator received unexpected message:%s
14052 AMP is already connected:%s
14053 Extent id allocation failed:%s
14054 Allocator found new device (should have been gerrymandered):%s
14055 Request state table is NULL:%s
14056 Caught exception while invoking timer func:%s
14057 Map block version mismatch: %s
14058 Evacuation of device failed: %s
14059 The migration type selected requires that the number of devices be a multiple of the number of AMPs. %s
14060 The migration type selected requires device profile information to operate properly. %s
14061 Bad clique list size:%s
14062 The extent map is being rebuilt. %s
14063 The extent map is being rebuilt due to a configuration change. %s
14064 The affinity area has been removed from a device: %s
14065 A forced rebuild of the Allocator's map on has been requested %s
14066 I/O Error: %s
14067 Migrations caused by affinity change could not be completed:%s
14068 A device whose affinity has been stripped will be ignored due to migrator type being TRADITIONAL_TERADATA. %s
14069 A device evacuation is resuming. %s
14070 An evacuated device will be ignored. %s
14071 Overriding migrator settings. %s
14072 Overriding affinity settings. %s
14073 Initiating restart to complete Move AMPs operation.
14074 Migration parameters in control GDO have been changed or have been initially read in. %s
14075 An incomplete evac is being retried. %s
14076 TVAM_OPTIMIZE_SYSTEM was started, and the system performance will be degraded. %s
14077 TVAM_OPTIMIZE_SYSTEM was cancelled, and the system performance will return to normal. %s
14078 Device %s will be ignored because its cylinder index size does not match that of the system.
14079 Startup request failed:%s
14080 Device %s tag conflicts with dbs control gdo.
14081 PUT-generated perferred mapping file not found.
14082 Problem with perferred mapping file: %s
14083 Allocator Informational Message: %s
14084 Space capacity on demand: %s
14085 Space capacity on demand: %s
14086 Space capacity on demand: %s
14087 Space capacity on demand restored: %s
14088 Space capacity on demand restore failed: %s
14089 Expected file not found. %s
14090 TVS Vproc lacks permission to access file. %s
14091 Vconfig gdo lists invalid node family that is not defined in the HwPerfInfo.txt. %s
14092 Disabling migration of cylinders due to %s AMP(s) approaching space limit.
14093 Enabling migrations as AMP(s) are no longer running on low space.
14094 Memory allocation failed:%s
14095 Unexpected result:%s
14096 %$HeaderInformational Message: %s
14097 %$HeaderWarning Message: %s
14098 Allocator Informational Message: %s
14099 Allocator Informational Message: %s
14100 Allocator Informational Message: %s
14101 Allocator Informational Message: %s
14102 Allocator Informational Message: %s
14103 Local caching is enabled.
14104 Existing local cache has been discarded due to a configuration change and will be rebuilt.
14105 Local Cache degraded due to %s.
14106 Local Cache disabled due to %s.
14107 Local Cache disabled due to configuration error: %s.
14108 Migration request timed out. Message details: %s
14109 Allocator warning message: %s.
14110 Allocator informational message: %s.
14500 %$Header Exception occurred within Migrator.%s
14501 %$Header A severe error occurred within Migrator that could not be responded to with exception.%s
14502 %$Header Invalidating the temperature boundary file due to %s
14503 %$Header Unable to write to the temperature boundary file due to %s
14504 %$Header Created a new temperature boundary file
14505 %$Header Device rebalancer has been initiated
14506 %$Header Device rebalancer has finished
14507 %$Header Device rebalancer has been cancelled
15000 Error injected deliberately by the TVS Node Agent.
15001 A memory allocation failed in the TVS Node Agent.
15002 An internal consistency check has failed in the TVS Node Agent.
15003 AMP Vproc %d has been marked FATAL due to an I/O error.
15004 The TVS Node Agent received error %d when creating a lock.
15005 The TVS Node Agent received error %d when destroying a lock.
15006 The TVS Node Agent received error %d when obtaining a lock.
15007 The TVS Node Agent received error %d when releasing a lock.
15008 The TVS Node Agent got bad message (type=%d, sending_vproc=%d).
15009 The TVS Node Agent was unable to open the TVS device: %s
15010 The TVS Extent Driver returned an error on a probe request: %s
15011 The TVS Extent Driver returned an error on a migration request: %s
15012 An I/O was performed by AMP %d which is not a clique member.
15013 The TVS Extent Driver returned an error on a break mirror request: %s
15014 The system service used for TVS Node Agent timing failed: %s
15015 The TVS Extent Driver returned an error on a stat ring map request: %s
15016 Bad token on line %d of the TVS Node Agent configuration file.
15017 Bad value on line %d of the TVS Node Agent configuration file.
15018 Too many values for parameter at line %d of the TVS Node Agent configuration file.
15019 The TVS Node Agent received an unexpected message of type %d during startup.
15020 The TVS Node Agent was invoked improperly.
15021 The TVS Node Agent received an ioctl failure from the TVS device: %s
15022 AMP vproc %d does not have a valid TVS vproc assignment.
15023 AMP vproc %d and TVS vproc %d belong to different subpools.
15024 Vproc %d in clique %d is assigned subpool %d which is already in use in clique %d.
15025 The TVS Node Agent got error %d when initializing RSS data collection
15026 TVS vproc %d does not have any AMPs assigned to it.
15027 TVS subpool %d contains at least 1 AMP but has no PDISKs.
15028 PDISK %d in subpool %d is not used by any AMPs.
15029 Previously reported error %d should have caused a restart
15030 Unable to collect CPU statistics (error %d)
15031 System stats sampling rate was changed from once per %d to once per %d seconds
15032 System stats distribution rate was changed from once per %d to once per %d seconds
15033 Error %d determining local ID for global device %d
15034 The I/O error flag has been cleared for AMP Vproc %d.
15035 AMP %d device conversion to TVS format failed: %s
15036 pre-TVS device conversion is %d percent complete in clique %d.
15037 A file error occurred in a netpde library call: %s
15038 A fatal file error occurred in a netpde library call: %s
15039 Missing or incomplete tvsa_vdisk_mapping file.
15040 The tvsa_vdisk_mapping file has a duplicate reference to device %d
15041 The tvsa_vdisk_mapping file has no reference to device %d
15042 Unable to initiate TVS I/O tracing: error %d
15043 Unable to open device %s %s: error %d
15044 An error occurred when attempting to read the TVS device tag: %s %s
15045 Pre-TVS disk conversion cannot proceed because device %d is inaccessible
15047 Pre-TVS disk conversion cannot proceed because device %d is in a different subpool than other pdisks of the vdisk
15048 Unable to allocate or initialize thread local storage %s
15049 Unable to read from device %s %s: error %d
15050 Device format conversion failed due to %s: %s
15051 Device format conversion failed (pdisk %d) due to %s: %s
15052 Device format conversion failed (pdisk %d cyl %d) due to %s: %s
15053 Device prep for TVS not complete for AMP %d unexpected SEG0 version %d
15054 System is stopping due to previous TVS Device conversion failure
15055 The vdisk mapping file maps device %d to invalid AMP %d
15056 The mapping of device %d to AMP %d causes subpool mismatch
15057 AMP Vproc %d has been marked FATAL due to bad TVS device tag.
15058 AMP Vproc %d has been marked FATAL due to failed TVS gerrymander.
15059 PDISK %d has failed to gerrymander into the configuration.
15060 PDISK %d has a missing or corrupted TVS device tag.
15061 Problem mapping pdisks to amps: %s
15062 AMP Vproc %d has been marked fatal due to a fatal TVS vproc.
15063 An I/O was performed by AMP %d whose assigned TVS vproc is not online
15064 Pdisk device %d is mapped to more than one pdisk %s
15065 Device %s %s has been failed intentionally
15066 PDISK %d has a different size than specified in the vconfig.
15067 Unable to determine the size of PDISK %d: error %d
15068 Name of PDISK %d is too long
15069 PDISK %d has incorrect System ID in its tag
15070 PDISK %d has incorrect device number %d in its tag
15071 AMP Vproc %d has been marked FATAL due to incorrect system ID on one of its pdisks.
15072 AMP Vproc %d has been marked FATAL due to incorrect device number on one of its pdisks.
15073 TVS migration parameter %s from %d to %d.
15074 Device global number %d is not unique.
15075 Creation of storage capacity on demand file failed at line %s"
15076 %s
15077 A device reservation failure was detected by TVS Node Agent.
15078 %s
15079 LUN reservations detected before TVS conversion.
15080 Reservation protection is not available on this node.
15081 Invalid CI Segregation configuration detected.
15082 Invalid subpool configuration detected.
15083 Invalid AgentDiskCache configuration detected.
15500 Success. No error occurred in the TVS Extent Driver
15501 Invalid Request
15502 Invalid Version
15503 Invalid Vproc
15504 Invalid Extent
15505 Invalid Offset
15506 Invalid Operation
15507 Invalid Plex
15508 Invalid Address
15509 Invalid Length
15510 Request queue full
15511 Verify failed to compare
15512 Memory could not be allocated
15513 I/O error
15514 Entry does not exist
15515 System error, see os_status field
15516 Entry already exists
16000 Context is uninitialized or corrupt.
16001 Application is not connected.
16002 Already connected.
16003 Application version is not compatible with the TVS SAM Library.
16004 No storage space is available.
16005 Storage type requested is not available.
16006 FUTURE_SAM_ATOMIC_WRITE option is not available in the current release.
16007 FUTURE_SAM_CLEAR_ON_ALLOC option is not available in the current release.
16008 No SAM_STORAGE_PROTECTED cylinders available.
16009 Only SAM_VOLATILE cylinders available.
16010 No SAM_MULTIPATH cylinders available.
16011 No cylinders available.
16012 No logical cylinder identifiers available (internal error).
16013 Invalid param passed to SAM routine.
16014 download of cylinder map failed.
16015 Out of memory.
16016 Unexpected internal error.
16017 Permission denied. Caller doesn't have permission to call this function.
16018 The requested cylinder size is greater than the maximum cylinder size allowed.
16019 Zero length cylinder requested.
16020 SamApplicationType is invalid.
16021 No response received from the allocator.
16022 The requested entry is FREE: %s
16023 IOCTL TVSA_CLEAR_EXTENT_MAP failed.
16024 Operation invalid for VPROC.
16025 TVS SAM Library failed to open debug file or log file.
16026 IOCTL TVSA_DEV_CLOSE failed.
16027 IOCTL TVSA_DEV_OPEN failed.
16028 The TVS device has not been opened. TVSA_DEV_IOCTL call is not allowed.
16029 TVSA_DEV_IOCTL call to add/upload an cylinder from the map failed.
16030 TVSA_DEV_IOCTL call to remove an cylinder from the map failed.
16031 Maximum number of entries requested is greater than SAM_MAXNUMENTRIES or SAM_MULTIEXTENTMAXIMUM.
16032 Call to SamGetFreeExtentList failed.
16033 Call to SamFinishFreeExtentRecovery failed.
16034 Unable to get CLIQUE ID for Specified VPROC.
16035 Unable get the number of previously freed cylinders for the calling vproc.
16036 Call to SamAllocatorInit failed.
16037 A message was sent before the TVS Vproc was ready to process it.
16038 Call to SamFinishQuarantineRecovery failed.
16039 Call to SamGetQuarantineList failed.
16040 The caller's VPROCID does not match the cylinder's owner.
16041 Call to SamUnSequesterAll failed.
16042 Some pdisks or TVS Vprocs are inaccessible. The calling AMP may be missing data.
16043 SamReleaseExtentList was called after cylinders in the list had been modified.
16044 Requested TVS Vproc is fatal or NONODE
16045 The SAM request failed due to a device I/O failure.
16046 An AMP that is not in the configuration tried to connect.
16047 The system is being restarted to bring FATAL TVS vprocs online for sysinit.
16048 The SAM update COD request failed due to another request in progress.
16049 The SAM update COD request failed because an allocator could not read its configuration file.
16050 The SAM update COD request failed due to a configuration file mismatch.
16051 The SAM update COD request failed due to the new limit being too small.
16052 The SAM update COD request failed due to exceeding the maximum downward adjustment.
16053 The SAM update COD request failed informing an AMP of the change.
16054 The SAM update COD request failed updating dbc.
16055 Requested TVS Vproc is offline
16056 The SAM update COD request failed due to a problem with the configuration.
16057 The update COD request failed due to finding sequestered cylinders.
16058 The update COD request failed due to problems with an AMP
16059 A timeout was detected in SamReadCIs()
16060 TVSA_DEV_IOCTL call was cancelled due to an in-progress migration.
16061 The Teradata Virtual Storage subsystem has detected that this AMP has multiple bootstrap (IDXCYLDURABLE) cylinders.

Back to home page