Setting Up RAID-1 - Kubernetes
Kubernetes Appliance Software Installation Guide
- Product
- Kubernetes
- Published
- June 2018
- Language
- English (United States)
- Last Update
- 2019-01-31
- dita:mapPath
- kpy1524680839041.ditamap
- dita:ditavalPath
- ft:empty
- dita:id
- kpy1524680839041
- Product Category
- Software
-
Press Ctrl+Alt+Delete to reboot the node.
-
When prompted, press Ctrl+R to open the Configuration Utility window.
-
If a Foreign View tab appears, delete it:
-
In the Configuration Utility, press Ctrl+N until the Foreign View tab is selected.
-
Select the top line, which starts with Intel Integrated.
-
Press F2 to open the Foreign Configuration dialog box.
-
Highlight Clear and press Enter.
-
When notified that the foreign configuration will be lost, click OK and press Enter.
-
Verify that the Foreign View tab has been deleted.
-
Create the virtual disk:
-
In the Configuration Utility window, press Ctrl+N until the VD Mgmt tab is selected.
-
If there are disk groups, select each disk group and press F2 to delete.
-
Select the top line, which starts with Intel and press F2 to select Create new VD.
-
Tab to RAID Level and press Enter.
-
To set the first VD to RAID-1, select RAID-1 and press Enter.
-
Tab to Physical Disks and press the space bar to select disk 0 and disk 1.
-
Tab to Advanced, press the space bar to select, then press Enter.
-
Tab to Write Policy and press Enter.
-
To set the Write Policy, select Write Through and press Enter.
-
Tab to Initialize and press the space bar to select.
-
Tab to OK and press Enter.
-
When informed that initialization will destroy data on the virtual disk, click OK and press Enter.
-
Click OK to finish creating the virtual disk.
-
Set Virtual Disk 0:
-
Press Ctrl+N until the Ctrl Mgmt tab is selected.
-
Under Controller Settings,
Tab to Enable then press the space bar to select the box (On).
This turns on the controller BIOS.
-
Tab to Enable Stop CC on Error then press the space bar to select the box (Off).
-
Tab to Apply and press Enter.
-
Press Esc, then Tab to OK and press Enter to save the changes.
-
Press Ctrl+Alt+Delete to reboot the node.