These columns provide statistics on current logging characteristics.
| Column Name | Mode | Description | Data Type |
|---|---|---|---|
| GmtTime | n/a | Greenwich Mean Time is not affected by the Daylight Saving Time adjustments that occur twice a year. | FLOAT |
| CabinetID | n/a | The physical cabinet number of the node. | INTEGER |
| ModuleID | n/a | The physical module number of the node. | INTEGER |
| ArrayName | n/a |
PDISK storage array name. In Summary mode, the value is set to '---'. |
CHAR(32) |
| PdiskGlobalId | n/a | Identifies the pdisk in the system. Each pdisk in the system has a global ID which uniquely identifies the pdisk in the system. If a pdisk is connected to the nodes in a clique, all the nodes in that clique see the same pdisk global ID associated with that pdisk. In Summary Mode, the pdisk global ID is -1. |
INTEGER |
| PdiskType | n/a | Type of pdisk. The pdisk can be one of the following:
|
CHAR(4) |
| PdiskDeviceId | n/a | Identifies the local pdisk device.
In Summary Mode, the pdisk device ID is 0xFFFFFFFF. |
BYTE(4) |
| NodeType | n/a | Type of node, representing the per node system family type. | CHAR(8) |
| Secs | n/a | Actual number of seconds in the log period represented by this row. Normally the same as NominalSecs, but can be different in three cases:
Useful for normalizing the count statistics contained in this row, for example, to a per-second measurement. |
SMALLINT |
| CentiSecs | n/a | Number of centiseconds in the logging period. This field is useful when performing data calculations with small elapsed times where the difference between centisecond-based data and whole seconds results in a percentage error. | INTEGER |
| NominalSecs | n/a | Specified or nominal number of seconds in the logging period. | SMALLINT |
| SummaryFlag | n/a | Summarization status of this row. If the value is 'N,' the row is a non-summary row. If the value is 'S,' the row is a summary row. | CHAR(1) |
| Active | max | Controls whether or not the rows will be logged to the resource usage tables if Active Row Filter Mode is enabled. If Active is set to a non-zero value, the row contains data columns. If Active is set to a zero value, none of the data columns in the row have been updated during the logging period. For example, if you enable Active Row Filter Mode, the rows that have a zero Active column value will not be logged to the resource usage tables. |
FLOAT |
| TheTimestamp | n/a | Number of seconds since midnight, January 1, 1970. This column is useful for aligning data with the DBQL log. |
BIGINT |
| PM_COD_CPU | n/a | Platform Metering (PM) CPU Capacity On Demand (COD) value in one tenths of a percent. For example, a value of 500 represents a PM CPU COD value of 50.0%. The value is set to 1000 if the PM CPU COD is disabled. |
SMALLINT |
| PM_COD_IO | n/a | Platform Metering (PM) I/O Capacity On Demand (COD) value in whole percent. For example, a value of 50 represents a PM I/O COD value of 50.0%. The value is set to 100 if the PM I/O COD is disabled. |
SMALLINT |
| WM_COD_CPU | n/a | Workload Management (WM) CPU Capacity On Demand (COD) value in one tenths of a percent. For example, a value of 500 represents a WM CPU COD value of 50.0%. The value is set to 1000 if the WM CPU COD is disabled. |
SMALLINT |
| WM_COD_IO | n/a | Workload Management (WM) I/O Capacity On Demand (COD) value in whole percent. For example, a value of 50 represents a WM I/O COD value of 50.0%. The value is set to 100 if the WM I/O COD is disabled. |
SMALLINT |
| TIER_FACTOR | n/a | I/O performance limit placed on a core-reduced node. For example, a value of 75 represents an I/O limit of 75.0% placed before other COD values. The field is sourced from tpanodep->tierfactor which is derived from the /proc/tdmeter/tier_performance file. A value of 100 indicates that there is no I/O performance limit applied to the node. |
SMALLINT |