Installing Stand-Alone Cabinet Stabilizers - Appliance for Hadoop

Appliance for Hadoop 6 Platform Product and Site Preparation Guide

Product
Appliance for Hadoop
Published
February 2018
Language
English (United States)
Last Update
2018-04-13
dita:mapPath
cwt1471885643827.ditamap
dita:ditavalPath
hadoop6.ditaval.ditaval
dita:id
ikf1471650918043
Product Category
Hardware
Use cabinet stabilizers for stand-alone cabinet configurations only. The side stabilizer kit, 2021-K221, comes with a left and a right stabilizer and four bolts. The bracket for the stabilizers is incorporated in the front bottom rail of the cabinet.
You must install side stabilizers for stand-alone cabinet configurations. Stabilization is required to prevent tipping of the cabinet when a heavy module is extended.
Do not block vented tiles with the stabilizers.
  1. Align the cabinet so that the stabilizers will not block vented tiles once they are installed.
  2. Place the left stabilizer on the floor in front of the left front of the cabinet.
  3. Slip the left stabilizer under the front lip of the cabinet cross member and adjust the leveling feet to align the bolt holes.
  4. Attach the left front stabilizer to the cabinet cross member, using two of the screws supplied in the kit.
  5. Place the right stabilizer on the floor in front of the right front of the cabinet.
  6. Slip the right stabilizer under the front lip of the cabinet cross member.
  7. Attach the right front stabilizer to the cabinet cross member, using two of the screws supplied in the kit.