The following supported configurations for a standalone 6700H 3+1 clique with SSDs and HDDs can be ordered from the factory:
SSD:HDD Ratio |
Configuration |
15:60 |
- Three TPA nodes plus one hot standby node to five disk arrays (3:5 ratio)
- 30 AMPs per node (APN)
- 15 SSDs per active node, 60 HDDs per active node (mixed drive types in each disk array)
|
20:80 |
- Three TPA nodes plus one hot standby node to five disk arrays (3:5 ratio)
- 40 AMPs per node (APN)
- 20 SSDs per active node, 80 HDDs per active node (mixed drive types in each disk array)
|
6700H 2+1 clique configurations with SSD:HDD ratios of 15:60 and 20:80, and 6700H 1+1 clique configurations with SSD:HDD ratios of 16:60 and 20:80, can be upgraded in the field to 6700H 3+1 clique configurations with SSD:HDD ratios of 15:60 and 20:80.
Upgrades from a 2+1 clique or 1+1 clique to a 3+1 clique will be based on a customer workload profile analysis.
In addition, three 6700H 2+1 clique configurations (those with SSD:HDD ratios of 15:120, 15:144, and 15:156) can be upgraded in the field to 6700H 3+1 clique configurations. The resulting unfolded 3+1 clique configuration has SSD:HDD ratios of 10:80, 10:96, or 10:104. Each 3+1 configuration has the same number of AMPs and drives as the 2+1 clique configuration, but the AMPs and drives are distributed on three nodes.
In the following table, the column on the left describes the existing 2+1 clique configuration, and the column on the right describes the resulting unfolded 3+1 clique configuration. For example, a 2+1 clique with an SSD:HDD ratio of 15:120 can be upgraded in the field to a 3+1 clique with an SSD:HDD ratio of 10:80.
Existing 2+1 Clique Configuration |
Resulting 3+1 Clique Configuration |
- Two TPA nodes plus one hot standby node to five disk arrays (2:5 ratio)
- 30 AMPs per node (APN)
- 15 SSDs per active node, 120 HDDs per active node (mixed drive types in each disk array)
|
- Three TPA nodes plus one hot standby node to five disk arrays (3:5 ratio)
- 20 AMPs per node (APN)
- 10 SSDs per active node, 80 HDDs per active node (mixed drive types in each disk array)
|
- Two TPA nodes plus one hot standby node to five disk arrays (2:5 ratio)
- 36 AMPs per node (APN)
- 15 SSDs per active node, 144 HDDs per active node (mixed drive types in each disk array)
|
- Three TPA nodes plus one hot standby node to five disk arrays (3:5 ratio)
- 24 AMPs per node (APN)
- 10 SSDs per active node, 96 HDDs per active node (mixed drive types in each disk array)
|
- Two TPA nodes plus one hot standby node to five disk arrays (2:5 ratio)
- 39 AMPs per node (APN)
- 15 SSDs per active node, 156 HDDs per active node (mixed drive types in each disk array)
|
- Three TPA nodes plus one hot standby node to five disk arrays (3:5 ratio)
- 26 AMPs per node (APN)
- 10 SSDs per active node, 104 HDDs per active node (mixed drive types in each disk array)
|
6700H 3+1 Node Clique Standalone Configuration (Two Quad and Two Dual 6 Gb SAS HBAs per Node)